The roll sponge compressing machine is used for all kinds of sponge packaging. The control system adopts touch screen and PLC. The roll sponge compressing machine is easy to operate. After setting all parameters, one key starts to work; the roll sponge compressing machine can be used according to the diameter, density and thickness of the roll The diameter of the cotton roll can be adjusted differ...

The sponge foaming line is a large-scale foaming machine, suitable for soft polyurethane sponges with a density of 4-180kg/m³. There are many types of sponges produced, such as furniture foam, memory foam, high resilience foam, vigorous foam, shoes Material foam and etc. ...

First of all, it is necessary to confirm the material and thickness of the cutting material, and what are the requirements for the precision, cutting effect and stability of the cutting machine. The sponge cutting machine can roughly process furniture foam, shoe material foam, latex foam, makeup foam etc., and then choose the type of cutting equipment....

In the furniture industry, we always encounter how the angle of the seat sofa is formed or what sponge machine cutting​ is used? Are you still cutting the angle with a sponge vertical cutting machine?...

In the process of producing sponges and sponge products, there are often a lot of leftovers. Throwing away will cause a lot of waste. The price of selling as waste sponge is low. How can the leftovers be reused effectively?...

The sponge horizontal cutting machine mainly cuts the block sponge into 2-150mm slices. The worktable adopts automatic digital settings, which can be adjusted automatically or manually according to its own needs. The operation is simple and the cutting is precise. Added pressure roller...

The method of distinguishing sponges in the industry is usually divided by density. The unit of density of sponges is kg / m³, which is the weight of sponge per cubic meter. Density is an important indicator of matter. The high density of the sponge means that the gap inside is small, and the mass is also large. For example: 40 density means that the weight of a cubic meter sponge is 40kg, and 50 ...

Whether the start-up time is too long, whether the density of the cut cotton is too high, adjust the knife box and the knife belt on the straight line of the knife box step, the hand can be easily rotated, the knife edge is located at 10-6 mm from the knife box. Replace the knife box if necessary....

The material temperature is best at 20 ℃ -24 ℃, too high foaming, fast drawing time, short gelation time, low viscosity of the foamed material, easy to cause partial exhaust, bubble delamination and overflow , Making the density distribution of the box uneven; too low foaming time, long drawing time, high viscosity of the foam, poor fluidity, will cause uneven mixing, partial shortage of material,...

The machine has been reasonably disassembled and packaged when it leaves the factory. When the machine is lifted, it should be operated according to the requirements and shape of the packaging box. The transportation process should avoid the deformation of the machine. ), Check the outside of the package for damage before opening the package....

Rolling bearings are used for rotating electrical machines. The bearings should be cleaned (using kerosene or diesel) every other month. The bearings should be replaced with clean grease. Gears, sprockets, etc. should be cleaned of oil before work every day and then lubricated....

In the process of production, we want to use sponge machinery to carry out a smooth and safe production. In mastering the correct operation methods and doing a good job of its daily maintenance, there are many problems to be paid attention to before the use of it. The sponge machinery factory will introduce it....